• Gas Regulator

    Gas regulator reduce the high-pressure gas in gas cylinder or a gas line for using industrial, laboratory , medical ,etc.That produce in different sizes and different options. Large gas regulator use in gas station and gas line and  small gas regulator usually use in  laboratories and research centers. A good and suitable gas regulator should change input gas pressure and  gas flow to constant output pressure. The vessel having to break the high-pressure regulator is very important in choosing the type of gas regulators should also be considered. Gas Regulator lets user to adjust the output pressure cylinder.Gas monometr has a range of bar, size, material .The limiting element is a valve that can control the flow changes such as Globe valve, Butterfly Valve, Poppet Valve. Equipment required for the loading of the force limiter provides, so by weight, ring, diaphragm actuator, piston actuator and the like are created. Instead of measuring the inflow and outflow regulator when the same is used.

    Gas Regulator

    Gas regulator single-stage and two-stage is available in different sizes. Pressure regulator installed the application into several categories:

    Cylinder Pressure Regulator

    Point of Use Regulator

    Line Pressure Regulator

    Gas Pressure Control Panel

    Leakage of gas regulator is very important for safety, it must be low in the body and internal parts , manometer .The corrosive gases is very important material of  manometer  must be stainless steel. ATDMTOOLS can provide gas regulator made in Germany, South Korea and these have certificate and warranty and service so please be delivered to the customer.

    Gas Regulator

    Regulator work based on Bernoulli’s law in fluid. Technical data and Gas Regulator has three main parts, the springs, gas regulator and the diaphragm. The pressure of the spring Regulator Gas will open the way to pass gas whenever gas pressure side outlet of spring pressure greater transit of gas to be closed to the consumption of the outlet pressure is reduced again after the passage of gas from the regulator gas and this practice will continue to alternate .The consumed in the workings of regulation is very important. The amount of reduction is called DROOP regulator. This pressure drop reduction of gas pressure regulators, there is a component. There are three solutions for alleviate this problem:

    1-Choose a gas regulator springs with constant coefficients (K) small

    2-Select large diaphragm of the gas regulator

    3-limit flow gas regulator valve.

    But in fact the problem cannot be resolved.The pilot regulator must be used. The spring force of the gas pressure regulator can be used instead. In terms of the type called PRESSURE LOADED REGULATOR

    Atdmtools have the regulators from Kore and  German with DRASTAR and HERCULES and ZINSER.About those brand you can read as below :

    DRASTAR Regulator:

    Dastard Company has the single stage pressure reducing regulator, high pressure regulator, two stage regulator, and Back pressure for easier operation. Those products are the most useful to Industry application and it has 1/4” NPT thread and stainless steel 316L material. Drastar has been designed to use at industrial gas lines, Laboratory application. You can use Drastar Regulator for pure gas, Mixed Gas, corrosive Gas and Liquid in the lines.

    You can select 3 ports, 4 ports types as per each application. Drastar has been designed range of pressure: Max Inlet pressure 3500 psig (241 bars) and outlet working pressure Max 500 psig (35 bars), you can select each model based on outlet pressure range. This push and lock system has been created and applied patent for DRASTAR regulators.

    Industry regulator: 072, 082, 092, DR 60

    High Pressure regulator: DR70, DR80, DR90

    High flow regulator: DR70, DR80, DR90

    Two stage regulator: series 2000

    Back presser: 077 low pressure, 088 high Pressure

    Hercules

    Hercules Company has the single stage pressure reducing regulator, high pressure regulator, two stage regulator, brass regulator and stainless steel regulator for easier operation. Those products are the most useful to Industry application and it has 1/4” NPT thread. Hercules has been designed to use at industrial gas lines, Laboratory application. You can use Hercules Regulator for pure gas, Mixed Gas, corrosive Gas and Liquid in the lines.

    Hercules has been designed for different Inlet pressure and outlet working pressure that you can select each model.

    N2 Regulator Hercules: ¼ “, inlet pressure: 200 bar, outlet pressure: 10 bar, 5 bar, 2 bars

    He Regulator Hercules: ¼ “, inlet pressure: 200 bar, outlet pressure: 10 bar, 5 bar, 2 bars

    O2 Regulator Hercules: ¼ “, inlet pressure: 200 bar, outlet pressure: 10 bar, 5 bar, 2 bars

    H2 Regulator Hercules: ¼ “, inlet pressure: 200 bar, outlet pressure: 10 bar, 5 bar, 2 bars

    Co2 Regulator Hercules: ¼ “, inlet pressure: 200 bar, outlet pressure: 10 bar, 5 bar, 2 bars

    C2H2 Regulator Hercules: 3/8 “, inlet pressure: 200 bar, outlet pressure: 1.5 bar